Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050
Aerial machine plasma metal cutting CNC Рlazма75 1550х3050

Listning ID 507904

Description

Machine air plasma cutting CNC metal - Plazma75 from the MANUFACTURER.

Our company Plazma75, the market for CNC machine tools with 2012. During this time, has done a great job and found the balance between quality, reliability and relatively low cost of the manufactured equipment.

Buying from us equipment - You get the machine directly from the developer and from the manufacturer, but also full technical support in the shortest possible time.

Our channel: https://www.youtube.com/user/beton410

Machine air plasma cutting CNC metal - Plazma75, with the size of the working area: 1550 x 3050 mm, designed for small and medium-sized businesses, for cutting sheet metal, to perform the cutting of metal on any contour, for manufacturing of any complex shapes, with a maximum recommended cutting thickness up to 25 mm.

Machine air plasma cutting CNC, is a complex product, which combines the standard parts, electrical elements, steel frame and precision mechanics.

On the one hand, the simplicity of the design, on the other hand, reliability and quality. This is the main distinctive feature of our equipment!

In the production of plasma machine, we use only proven and high quality components!

The construction of this machine, our production have been designed taking into account the conditions of plasma cutting (improved dust and the presence of smoke and gas mixtures).

Linear bearings have a low cost, and, if necessary, their replacement will not be very expensive.

In addition to the mechanical part of the plasma machine, is very important and the electronic part, from the clear and accurate electronic tracking system, and its settings - depends on the quality of the cut !

Modern CNC systemused in our equipment, combined with accurate and high-quality mechanics of the machine allow to achieve high precision and quality cutting of metal, and to provide repeatability of cut parts in serial production.

SPECIFICATIONS:

- Dimensions of working table: 1550 x 3050 mm.;

- Dimensions of the workpiece: 1550 x 3050 mm.;

- Type of motors: stepper;

The X - axis linear bearings on a cylindrical guide;

The Y - axis linear bearings on a cylindrical guide;

- Z-axis linear bearings on a cylindrical guide;

- X, Y: rack and pinion transmission;

- Z axis: ball screw transmission;

- Positioning accuracy (mechanical): ± 0,2 mm;

- Vertical stroke travel of the torch: 100 mm.;

- The maximum possible speed idle movements: up to 10 m/min.;

- Cutting speed: 8 m/min.;

- Remote control with electronic tracking system torch height TNS - voltage arc.

- Table weight: 350 kg;

- Maximum weight load in the working area of table: 950 kg.

In the body of the table are the hatches for connection to an existing ventilation system.


It can be installed on the machine:

- HIVIN guide rails or SKF in all axes;

MANAGEMENT:

THE REMOTE CONTROL OF THE MACHINE PLASMA CUTTING.

Multi-axis (4-axis) control of stepping motors.

SPECIFICATIONS:

Supply voltage: 230 VAC, 50 Hz;

- Voltage logic circuit: 5 VDC, 12 VDC;

- Enable/disable network and PC, an emergency stop;

- Protection against incorrect connection of the motors from over-current, voltage and short circuit protection;

- Electronic tracking system for torch height THC (torch height control) for the arc voltage;

- Control system: the PC LPT port, the program Mach 3.


Is possible to install a professional CNC panel F2100.

CNC panel F2100 - designed specifically for machine tool control gas / plasma cutting, and fully replaces the host PC. Resistant to electromagnetic interference, has a built-in library of standard products and the ability to manage gas cutting. Cutting holes at lower speeds, braking in corners and arcs, disabling control of the torch height during the passage of the corners (the"anticevic"), dynamic punch and a lot of different settings and functions.

All machines are complete set-up, calibration and testing in our manufacturing areas, and fully prepared to work.

Additionally, the table is equipped with sources of plasma cutting: Hypertherm.

Also, we can connect your existing source plasma cutting.

The price table is stated without a source of plasma cutting.

The production time of the machine: 45 working days.

Warranty period: 12 months.

During this period, in case of warranty is replacement of components.

Accessories are available in our warehouse.

TRAINING:

It is possible to learn on the basis of str.

On the day of shipment of the equipment, the training is free!

If necessary, carry out site visits to the Customer, we produce training, start-up operations and start the machine in the premises of "Customer". Price is negotiated separately.

The kit to the machine Plazma75 includes the instruction for installation and training on the machine.

The kit includes all the necessary scripts, post processors and tools for popular programs, like Mach3, SheetCam, Pronest, and table cutting.

Thanks to the availability of the data provided - the work on the machine, does not pose any difficulty, even for beginners !

Technical support is available by phone.

HOW TO WORK ON THE MACHINE ?

1. Set the sheet or billet.

Step 1. Create a drawing or upload a prepared file in the format *.dxf

(Kompas, Autocad, Corel, etc).

Step 2. Lay the cutting path automatically, or indicate if there are other requirements.

Step 3. Choose the amperage at the source.

2. Cut detail.

If You have any questions, please contact us. We will give recommendations on the selection of equipment tailored to Your needs.

ATTENTION!!!

- Training of staff on the day of shipment of the machine - for FREE!

- Loading of the machine by appointment.

Delivery of equipment is entrusted to the BUYER.

- Delivery of the machine at the expense of the BUYER.

Additional information
For all questions regarding this announcement, please call
Reviews

Customer reviews for this ad are not available.

We will be very grateful if you leave first.

Post a review

Write to author

Some authors prefer to communicate via email.

You can write to them here. Write to author
Related ads

© 2001-2024 Post to classified in Center Ads of Dnipro (Dnipropetrovs'k) and of Dnipropetrovsk region in all regions of Ukraine (except temporarily occupied territories). All rights reserved.

Using this website, including the supply of ad means you accept user agreement .

This bulletin board has been working for 15 years on the equipment ordered on the Servers in Ukraine website.

Post to classified in Center Ads of Dnipro (Dnipropetrovs'k) and of Dnipropetrovsk region